Build Year: 2020

Used For: Rod&line/Netting/Potting

Hull: GRP

Length: 6.52m

Beam: 2.36m

Draft:

Licence:

Full Cat A licence Bass entitlement rod/line1.46Tons 78KW

Engine:

Volvo Penta TAMD31
PRM 750D1.5 (down angle)

Hydraulics:

SpencerCarter SoloNet Hauler
Spencer Carter hydraulic pump and tank runs off PTO
Mackerel Gurdy

Electronics:

Furuno NavNet vx2 plotter/sounder/radar
Raymarine AutoPilot
Furuno GP32
ACR spotlight
3 Automatic bilge pump
Jabsco deck wash
Start & Auxiliary Battery’s split load relay
Adjustable electric trim tabs

Additional Information:

This boat was built by Bill Warner who’s had vast experience in boat building, after building his own offshore 105 (Mistress) and Cygnus GM33 (KirstyLin). This Colvic was built post 1980 but rebuilt in 2020
The sea keeping of this boat has to be the best of its kind.
Port and starboard stainless fuel tanks with a total capacity of 120 litres.
The bottom has had VC tar applied.

Used mainly for netting during winter months then rod and line in spring and summer. Selling for a bigger boat. This boat has served us well the last 3 years and has given as platform to better ourselves. Great boat for starting out or upgrading from a smaller vessel.


Would consider splitting boat and bass from licence