Build Year: 2014

Used For: Commercial Use

Hull: Steel

Length: 9.25m

Beam: 3.95m

Draft: 1.60m

Licence:

The vessel is constructed to the MCA workboat code of practice and can operate up to category 3 regulations (Up to 20 nautical miles from a safe haven)

Engine:

Main Engine: Dooson LO66T1, 4 Cylinder, 180hp (132Kw), Turbocharged, Intercooled
Propeller: 1 Metre diameter, 3 bladed propeller

Hydraulics:

Electronics:

Additional Information:

The MMS Guardian is a 10 metre workboat built by MMS within our own shipyard facility. The vessel is constructed to the MCA workboat code of practice and can operate up to category 3 regulations (Up to 20 nautical miles from a safe haven). This vessel can be utilized to carry out a number of different tasks such as; Safety stand-by, line handling, survey operations, pushing, light towing (2.2 Tonne bollard pull) marine civil engineering support and any other general workboat duties as required.

The MMS Guardian is road transportable.

The vessel is equipped with the following:

• Davit arm with manual winch, can be deployed on both sides of the vessel
• Towing Bollard
• Boarding ladder
• Vertical push bow fender
• Towing arrangement
• Search light

Propulsion/Mechanical
Main Engine: Dooson LO66T1, 4 Cylinder, 180hp (132Kw), Turbocharged, Intercooled
Propeller: 1 Metre diameter, 3 bladed propeller
Bow thruster

Steering
- Power steering, manual hydraulic with double cylinder operating tiller with wheelhouse rudder indicator. Operated with a wheel or steering lever.
- Manual emergency steering tiller arm

Pumps
- Electric bilge pump with alarm and control system
- Deck wash pump

Fire Protection
- Pyrogen fire suppression system

Tank Capacities
Fuel tank capacity: 1,000 litres

Navigation
- GPS
- Steering compass
- Fixed VHF radio with DSC function
- Radar reflector

Wheelhouse
Fully Furnished Wheelhouse, twin fold down seats. Tube heater, small work desk.