Build Year: 2005

Used For: Scalloping

Hull: Steel

Length: 14.98m

Beam: 5.98m

Draft: 3.60m

Licence:

Cat A and scallop 221 kw 33.67 tonnes

Engine:

Main engine Volvo D13 NEW September 2018
Gen set Volvo D5 NEW September 2018
Twin disc MG 5170 ratio 6,95/1 ,new electronic shift 2018

Hydraulics:

Macduff 2 Drum winch NEW September 2019 Hagglunds motor
2 x 4 tonne topping winches NEW September 2018
2 x 2 tonne pull down winches NEW September 2018
main hydraulic pump (NEW February 2020) driven from gearbox
8 aside stainless steel tipping doors NEW September 2018
hydraulic driven (from genset retrieve ) Stainless steel conveyors for 8 dredges New September 2018
Emergency retrieve pump/valves on Gen set NEW May 2019

Electronics:

Furuno Black box radar
Hondex sounder
2 x icon vhf/dsc
2 x Furuno gp 32
Navitron NT 777 autopilot
Sat system V-SAT ON HIRE
VMS
Furuno radar
Olex with hardness
Maxsea time zero
4 camera system

Additional Information:

Vessel had full conversion from trawler to Scalloper September 2018.
New main engine
New Genset
Novec engineroom extinguisher system
New galley fitted
New wheel house fitted
New mid gantry, derricks ,blocks etc
New aft Gantry ,blocks etc
New 8 aside stainless steel tipping doors
All new hydraulic stainless steel pipework ,valves ,rams etc
Prop refurbished
Fishroom refridgeration ,compressor / motor / pipework /3PH renewed September 2020
Last painted January 2021
New batteries May 2021
New conifer pipework in engineroom June 2021

Divided into
Engineroom
4 berth cabin
Fishroom
Rudder compartment

Separate Shower /toilet
Separate Galley
Gear store under wheelhouse
Wheelhouse