Build Year:

Used For: Trawling - Scalloping

Hull: Steel

Length: 14.97m

Beam: 5.15m

Draft: 2.44m

Licence:

CAT A WITH SCALLOP 220.60 KW 29.31 Tonnes - Plus area 7 FQA

Engine:

DEAWOO MD196 main engine fitted 2014 (14,000 hrs ) piston and liners 2017
Dongi gearbox 4.5 /1 rebuilt 2014

Hydraulics:

All new hydraulics 2017
4 drum Beamer winch (BOP). 6 tonne (refurbed by Champion engineering Brixham )
2017 main winch motor /new bearing / clutches /Brakes / etc
New derricks
2 tonne rotzler pull down winch
Single Hydraulic netdrum (refurbed )

Electronics:

1x Koden radar
2 x VHF /DSC icon / sim rad
1 x Furuno colour sounder
2 x GPS 32 + 50
2 x Maxsea x O
Olex Dual screen and Ground discrimination
New 2018
simrad sat Compass
Navitron auto pilot

Additional Information:

4 berth cabin forward and toilet

New 2013
Mitsubishi gen set 35 HP 12.5 KVA
New decks in working area
New rails in working area

2014
Main engine deawoo MD 196 fitted
Engine room over hauled
New fishroom insulation /boards and fibreglassed

2016
Shot blasted deck /rails /hatches /hull down to keel
Zinc sprayed above waterline

2018
New fishroom refridgeration ,compressor and 22 mm copper pipework

New 2019
stainless steel tail shaft
Inboard / out board cutlass bearings
Prop refurbished and re pitched
Cooper bearing in fishroom

New 2020
4 man life raft

New 2021
Full MCA certification completed

Macduff Stability book dated 2004

Trawl gear (3 trawls ) bison doors size 10
Set of 6 aside scallop dredges /poles / chains etc
All blocks for scalloping used 3 months