Hull: Steel

Length: 13.40m

Beam: 5.00m

Draft: 2.60m

Licence:
Category AO Beam & Scallop Non Sector 221kws & 43.20 Grt

Engine:
New Scania DL13 080M (03-61) fitted 2020
New Aux Gen Set Fitted 2019

Hydraulics:
North Sea 2 Drum winch which had a New Motor fitted 2020 noisy but works away ok.
Several Gilson Winches

Electronics:
Usual

Arpa Radar on Hire from Sirm Uk

The Boat is lying in Brixham Harbour as She was Detained by the MCA for 4 or 5 Small Jobs required to be done prior to a Full Inspection.
1 Bulwarks at the Aft End of the Conveyors at Scuppers some Steel Needs Done.
2 Stb Navigation Light is Loose and the Bulb is Detached from the Lense.
3 Accomodation Door Buckled and not able to be Dogged Down - Fishroom Hatch & Aft Store Hatch Dogs are Seized.
4 Exhaust is Cracked.

These to be Done Prior to Sailing.

The Both Sides of the Vessel along with All her Deck Beams & Deck Plates All been Renewed 2019.

Fishroom Small but ok for her size Fibreglassed.

New Main Propeller Shaft Fitted October 2019.

New Gantry & Beams Fitted 2020.

She Had Tipping Doors But They Were Done Away With so Tip The Gear with the Tipping Bar.

She could easily suit being Converted to a Crabber - Whelker - Netter

She is a Deep Drafted Boaty for her Size with 7-1 Red plus a Nozzle.

The Amount of Money Spent on this Boat is Unreal We could have Built one.

She would benefit greatly if she had a New Wherlhouse and Accomodation Done as the
rest of her Mechanical is A1.

No Scallop Dredges with Her but she has the Towing Bars & Chains.