Hull: Steel

Length: 11.89m

Beam: 4.73m

Draft: 2.70m

Licence:
CAT A 20.05T, 179.04KWS, SHELLFISH, SCALLOPS, NORTH SEA & AREA VII BEAM TRAWLING, I.O.M. WHELK, CRAB & LOBSTER PERMIT

Engine:
COMMINGS NT855M BIG CAM & TWIN DISC 5.1-1 GERBOX WITH PTO. Nozzle

Hydraulics:
SPENCER CARTER 2.5T WENCH COMPLETE WITH 5 X GILSON WENCHES :- 2X LIFTING, 2X TIPPING & 1X PULLING (ALL CONTROLLED FROM WENCH POSITION)
SPENCER CARTER 2TON HAULER & S/S ROLLER BENCH
NET DRUM & LANDING WENCH

Electronics:
OLEZ ON HIRE, DUEL SCREEN WITH GROUND HARDNESS.
FURUNO SOUNDER.
FURUNO SAT COMPASS.
FURUNO AUTO PILOT.
2010 GARMIN CHART PLOTTER.
2X VHF ICOM DSC.
2X KODEN GPS NAVIGATOR.
NEW HONDEX SOUNDER.
NEW JRC RAYDAR.
FURUNO GP32 GPS NAVIGATOR.
T.V.

Would consider part exchange for U10m potter.
Wheel house has had new windows, roof, paneling and 4 berth cabin (sink in cabin). Toilet on the port side. Duel controls at hauling roller bench. New Perkins 20kva generator (not wired). New Vetus now thrusters (not wired). Fishroom newly ply sheeted and G.R.P. coated. New plating on bottom below hard chine. Generator, gear oil and hydraulic oil keel cooled through new s/s coolers. New aluminum mast on wheelhouse roof. New galvanized gantry and rigging for scallops. Aluminum scallop sorting bins for 4 a side s/s water tank (not plumbed). S/S catcher and closeable shooting door. Wench and scallop rigging removeable leaving clear deck for potting. MCA certified. At present undergoing annual maintenance and paint. Boat can be sold as a potter without licence, wench and scallop gear.
Do not hesitate to contact me for further information or if you have any questions.